SECTION I: Material Name
- LA PLATA 34
SECTION II: Ingrdedients and Hazards:
| Palladium | (7440-05-3) | 55.0% | Silver | (7440-22-4) | 34.0% |
| Indium | (7440-74-6) | 6.0% | Tin | (7440-31-5) | 3.0% |
| Zinc | (7440-66-6) | 1.0% | Gallium | (7440-55-3) | 1.0% |
| Ruthenium | (7440-18-8) | Trace |
Hazard Data:
| For pure silver (dust and fumes) | 8 hr TLV | 0.01 mg/m3 |
| For pure indium (dust and fumes) | 8 hr TLV | .1gm/m3 |
SECTION III: Physical
Data
Appearance: White color, no odor (see "more info")
SECTION IV: Fire and Explosion Data This alloy is fire and explosion resistant.
SECTION V: Reactivity
Alloy is insoluble in water.
Alloy oxidizes
at very high temperature but remains stable.
SECTION VI: Health Hazard
Information
Silver and Indium are present in this alloy. High concentrations
of silver fumes or dust may cause dermitittis or upper respiratory tract irritation.
Exposure to high concentrations of Indium may cause skin irritation or toxicity
when ingested.
FIRST AID: Skin Contact: Flush skin and scrub with soap
and water.
Inhalation: Remove person to fresh air. Assist breathing with oxygen
if necessary. Ingestion: Give large doses of water to induce vomiting.
Eye
Contact: Flush eyes with running water including under eye lids.
SECTION
VII: Spill and Leak Procedures
Recover dust by vacuuming or wet sweeping
while wearing respirator and protective clothing. Save for metal value.
SECTION
VIII: Special Protection Information
General and local ventilation as
well as exhaust should be employed. Respirators, goggles and gloves should be
used.
SECTION IX: Special Precautions
Avoid inhalation of dust
and fumes. Avoid skin contact.
| home | white pfm alloys | processing conditions |